Домашняя швейная машина лапка свернутый подол ноги набор для Brother 3 размера

Material: high quality stainless steel (some with ABS plastic)
Dimensions (length * width * height): 17.5*11*2.5cm/6.9*4.3*1.0inch, weight 215 grams
Specifications: Presser foot mount (connector): 1/4inch 6 mm, 3/8inch 10 mm, 5/8inch 16 mm

Presser foot installation method:
1. Observe the original bracket and remove it;
2, remove the original bracket with a screwdriver;
3. Install the bracket and tighten the screws with a screwdriver;
4. Put on the presser foot hole and the fixing screw on the bracket to be used;
5, tighten the fixing screws after proofreading the position;
6, can be installed after the operation.
Package Included:
1x Sewing machine presser foot
Note:
After installing the presser foot, manually try to see if the needle collides with the presser foot to prevent the presser foot from breaking the needle. Vintage sewing machine is available. Judging yourself to use the sewing machine: see if the bracket can be removed.